LED-Leuchtstofflampe 150 cm (einzeln) | Möchten Sie eine 5-Jahres-Garantie kaufen?

Direct to:
Description
Technical Data
Reviews
Relevant products

Technical Data

Product category

150cm LED Batten Fixtures
Length (cm)

153
Width (cm)

4
Height (cm)

5.5
Voltage

220-240V
Light color

Je nach Lichtquelle
Lifespan (hours)

Afhankelijk van lichtbron
Number of light points

1
Fitting

G13
IP rating

IP22 - Drip-proof
Control

External control
Housing color

White
Housing material

Aluminium
Number of cores

3
Light source included

No
Beam angle

Afhankelijk van lichtbron
Warranty

5 Jahre
Certifications

CE, RoHs
Connection

Mains power
Power

Afhankelijk van lichtbron
Installation

Structure

LED Tube Fixture 150cm (Single) | 5 Years Warranty

IP22 (Drip-proof)
Suitable for indoor use
Aluminum housing
Dimensions in mm: 1538 x 50 x 40 (LxWxH)
Suitable for 1 LED tube of 150cm
Including all mounting materials
5 years warranty
LED tubes NOT included.

LED tube fixture information:

This single LED tube fixture is suitable for 1x 150cm LED tube and has a length of 150cm. This single 150cm tube fixture has an IP rating of IP22 (drip-proof) and is therefore only suitable for moisture-free areas. This tube fixture can be linked to multiple tube fixtures; you can route the cable through the fixture to the next one. You can place all 150cm LED tubesin this fixture. This LED batten is made of lightweight and sturdy aluminium, and the housing is finished in a matte white color. Due to its high quality, you benefit from a 5-YEAR warranty!!

Installation is very easy.. You can mount the LED batten directly to the ceiling or wall with screws; the screw holes are already pre-drilled. This LED batten is powered directly on one side with mains voltage (220-240V). This LED batten no longer contains a starter or ballast (VSA). The LED tubes are also powered directly on one side with 220-240V. This is much more energy-efficient, as a ballast also continuously consumes power and can break down.

LED batten connection:

Ensure that 220-240V power cables are available at the location where you want to install the LED fixture.
Screw the LED batten to the ceiling, wall, or another surface.
Connect the power cable to one end of the fixture (Therefore, no cable needs to be installed on the other end. This socket/fitting serves as a "dummy" to hold the LED tube in place.)
Slide the fittings/sockets into the designated holes/recess.
Place the cover over the sockets and around the fixture, then press it securely into place. Next, twist the plastic clips into the holes that are still visible at the bottom.
Insert the LED fluorescent tubes into the fixture, placing the end with the specification sticker of the LED tube into the socket/fitting of the LED fixture where you connected the 220-240V.
Turn the power back on and enjoy the light output of LED lighting.

For more information regarding the installation and operation of LED fixtures and LED tubes, please refer to our article. “How do I connect LED tube lighting?”

Looking for multiple types/lengths of tube fixtures? Under our category 'Tube fixtures' you will find all our tube fixtures.

Questions & Answers loading...