PHILIPS LED Tube Fixture 120cm (Single) | Incl. 15.5W LED Tube

Philips LED Tube Fixture 120cm (single) including LED Tube 15.5W

Philips Tube Fixture Information:

• IP22 (Drip-proof)
• Suitable for indoor use
• Metal housing
• Dimensions in cm: 124 x 17.5 x 25 (LxWxH)
• Suitable for 1 LED tube of 120cm
• Includes all mounting materials
• 3 years warranty

Philips LED Tube Information:

• 15.5 Watt, replaces 36 Watt
• Length: 120cm
• Design: Thermoplastic (hard plastic)
• Lifespan in hours: 30.000 hours
• Lumens: 1800lm (light output)
• Light color: 3000K, 4000K, 6500K
• 3 years warranty

Philips LED waterproof batten information:

This single Philips LED batten has a length of 120cm with a consumption of only 18 watts. This batten comes standard with the corresponding 120cm LED tube included. This replaces all "old" 36-watt fluorescent tubes. Therefore, you no longer need to purchase a separate LED tube. This single 120cm batten features an IP rating of IP22 (drip-proof) and is therefore only suitable for moisture-free spaces. This fluorescent batten can be linked with multiple fixtures; you can feed the cable through the fixture to the next one. You can place all 120cm LED tubesin this batten. This LED batten is made of light and sturdy aluminum, and the housing has a matte white finish. Due to its high quality, you enjoy a 3-YEAR warranty!!

Installation is very easy. You can mount the LED batten directly to the ceiling or wall using screws; the screw holes are already pre-drilled. This LED batten is powered directly on one side with mains voltage (220-240V). This LED batten no longer contains a starter or ballast (VSA). The LED tubes are also powered directly on one side with 220-240V. This is much more energy-efficient, as a ballast also continuously consumes power and can break down.

Connection of Philips LED batten:

1. Ensure that 220-240V power cables are present at the location where you want to install the LED batten.
2. Screw the batten to the ceiling, wall, or another surface.
3. Connect the power cable to one foot of the fixture (Therefore, no cable needs to be installed on the other foot. This foot/socket serves as a "dummy" to hold the LED tube in place.)
4. Slide the sockets/feet into the designated holes/cutouts.
5. Place the cover over the feet and around the fixture, and press it into place. Then turn the plastic clips into the holes that are still visible on the bottom.
6. Insert the LED fluorescent tubes into the fixture, with the end featuring the sticker with the LED tube specifications placed into the socket/fitting of the LED fixture where you connected the 220-240V.
7. Turn the power back on and enjoy the light output of LED lighting.

For more information regarding the connection and operation of LED fluorescent fixtures and LED tubes, please refer to our article. “How do I connect LED tube lighting?”

Looking for multiple types/lengths of tube fixtures? Under our category 'Tube fixtures' you will find all our tube fixtures.