Philips LED Batten 150cm (Double) with Reflector | Incl. 2x LED Tube 20W

Philips LED Tube Fixture 150cm (double) with reflector | Incl. 2x LED Tube 20W

• IP 22 (Drip-proof)
• Suitable for indoor use
• Metal housing
• Dimensions in mm: 1538 x 150 x 73mm (LxWxH)
• Suitable for 2 LED tubes of 150cm
• Including all mounting materials
• 2-year warranty

Tube Information:

• 20 Watt, replaces 58 Watt
• Length: 150cm
• Version: Thermoplastic (hard plastic)
• Lumen: 2200lm (light output)
• Operating hours: 25.000 hours
• Available in the light colors: 3000K - 4000K - 6000K
• 2-year warranty

Philips LED batten fixture information:

This double Philips LED batten fixture with reflector has a length of 150cm with a consumption of 2x 20 watts. This double 150cm batten fixture with reflector comes standard with 2x LED fluorescent tubes. The included LED tubes replace all "old" 2x 58 watt fluorescent tubes. Therefore, you do not need to buy a separate LED tube.

This fluorescent fixture has an IP rating of IP22 (drip-proof) and is therefore only suitable for moisture-free areas. This fluorescent fixture with reflector, also known as a trough fluorescent fixture, is frequently used in warehouses, workshops, or other industrial spaces. The reflector hood ensures that the light is directed downward rather than to the sides. This LED batten fixture can be linked with multiple LED batten fixtures; you can daisy-chain the cable through the fixture to the next one. In this LED batten fixture with reflector, you canplace all 150cm LED fluorescent tubes . This LED batten fixture with reflector is made of lightweight and sturdy aluminum, and the housing is finished in a matte white color. Thanks to the high quality, you have a2-YEAR warranty period!!

Theinstallation is very easy . You can mount the LED batten fixture directly to the ceiling or wall with screws; the screw holes are pre-drilled. This LED batten fixture with reflector is powered directly on one side with mains voltage (220-240V). There is no longer a starter or ballast (VSA) in this LED batten fixture. The LED fluorescent tubes are also powered directly on one side with 220-240V. This is much more energy-efficient because a ballast also continuously consumes power and can break down.

Connecting Philips LED tube fixture:

1. Ensure that 220-240V power cables are present at the location where you want to mount the LED fixture.
2. Screw the tube fixture to the ceiling/wall or another surface.
3. Connect the power cable to the fixture (powered on one side, so no cables run to the other two pins. These pins/sockets serve purely as "dummies" to hold the LED tube in place).
4. Click the sockets/pins into the designated holes.
5. Place the reflector cover over the fixture and secure it with the provided plastic clips.
6. Insert the LED tubes into the fixture, placing the end with the specification sticker of the LED tube into the socket/fitting of the tube fixture where you connected the 220-240V.
7. Turn the power back on and enjoy the light output of LED lighting.

For more information regarding the installation and operation of LED fluorescent fixtures and LED fluorescent tubes, please refer to our article."How do I install LED fluorescent lighting?"

Looking for multiple types/lengths of fluorescent fixtures? Under our category ' LED fixture' you will find all our fluorescent fixtures.