ION LED Dimmer | 1-10V | 1380W
-
Reviews
...
-
Free shipping on orders over 75,-
-
Ordered before 4:00 PM, shipped today
-
Hassle-free returns – 30 days to decide
ION LED Dimmer | 1-10V | 1380W
- Direct to:
- Description
- Technical Data
- Reviews
- Relevant products
Technical Data
-
Product category
-
Length (cm)
-
Width (cm)
-
Height (cm)
-
Voltage
-
IP ratingIP20 - No protection
-
ControlProduct control
-
Dimming technologyTrailing edge
-
Housing colorBlue
-
Housing materialAluminium
-
Warranty
-
CertificationsCE, RoHs
-
ConnectionMains power
-
InstallationBuilt-in
-
Maximum wattage
Universal ION LED Dimmer | 1-10 Volt
The LED Controller is extremely suitable for dimming high-wattage LED Drivers. In addition, the universal controller is reliable due to its built-in protections and features easy installation. Furthermore, you can finish the LED Controller stylishly with cover materials from all major A-brands. This LED Dimmer is also extremely suitable for dimming low-voltage lamps (1-10V).
With this dimmer, you can dim up to 6 Amperes of power, which equals 1380 Watts of power. The dimmer has been tested for drivers from brands such as Meanwell, AGT, and Tridonic, among others. The dimmer is compatible with switch gear from the following brands: Gira, Busch-Jager, Jung, PEHA, and Berker. The dimmer has an IP rating of IP20 and can only be installed in dry areas. The dimmer itself has a power consumption of 0.3 Watts.
What makes this dimmer so unique is, among other things, its silent dimming and stable performance at both high and low wattages.
Product features
- Overload protection: Yes
- Wattage: 0.3-200 Watts
- Fine-tuning: Yes, you can fine-tune this dimmer using the adjustment screw
Overload protection
This 1-10V LED dimmer is resistant to overload, for example when you connect too much wattage to a single dimmer. In the event of an overload, the LED dimmer will interrupt and reset itself. This makes the dimmer extra safe.
Maximum wattage
The minimum wattage for this LED dimmer is 1380 Watts. You should keep this in mind when connecting LED lamps or LED drivers.
Fine-tuning
This dimmer easily dims from 0 to 100% and can be finely adjusted using the adjustment screw on the LED dimmer.You will need the adjustment screw if an LED lamp flickers when dimmed; you can fix this by using the adjustment screw to set it to the correct position.
Installation of Ion LED dimmer
Install the dimmer according to the diagram (last image). Connect your switching wire to the terminal with the power symbol L0. Connect your control wires to the plus (+) and minus (–) on the dimmer. Then, connect the same wires to the plus and minus on the control side of the driver.
