LED-Leuchtstofflampe 120 cm (doppelt) | Möchten Sie eine 5-Jahres-Garantie kaufen?

Direct to:
Description
Technical Data
Reviews
Relevant products

Technical Data

Product category

120cm LED Batten Fixtures
Length (cm)

123
Width (cm)

7
Height (cm)

5.5
Voltage

220-240V
Light color

Je nach Lichtquelle
Lifespan (hours)

Afhankelijk van lichtbron
Number of light points

2
Fitting

G13
IP rating

IP22 - Drip-proof
Control

Externe Steuerung
Housing color

White
Housing material

Aluminium
Light source included

Nein
Beam angle

Afhankelijk van lichtbron
Warranty

2 jaar
Certifications

CE, RoHs
Connection

Netzstrom
Power

Afhankelijk van lichtbron
Installation

Montage

LED Batten Fixture 120cm (Double) | 5-Year Warranty

IP22 (Drip-proof)
Suitable for indoor use
Aluminum housing
Dimensions in mm: 1232 x 50 x 40 (LxWxH)
Suitable for 2 LED tubes of 120cm
Includes all mounting materials
5-year warranty
LED tubes NOT included.

LED batten fixture information:

This double LED batten fixture is suitable for 2x 120cm LED tubes and has a length of 120cm. This double batten fixture 120cm has an IP rating of IP22 (drip-proof) and is therefore only suitable for moisture-free areas. This batten fixture can be linked with multiple fixtures; you can route the cable through the fixture to the next one. You can install all 120cm LED tubesin this batten fixture.. This LED batten is made of lightweight and sturdy aluminium, and the housing is finished in a matte white color. Due to its high quality, you benefit from a 5-YEAR warranty!!

Installation is very easy. You can mount the LED batten directly to the ceiling or wall using screws; the screw holes are already pre-drilled. This LED batten is powered directly on one side with mains voltage (220-240V). This batten no longer contains a starter or ballast (VSA). The LED tubes are also powered directly on one side with 220-240V. This is much more energy-efficient, as a ballast also continuously consumes power and can break down.

LED batten connection:

Ensure that 220-240V power cables are present at the location where you want to install the LED batten.
Screw the batten to the ceiling/wall or another surface.
Connect the power cable to the fixture (Therefore, no cable needs to be installed on the other end caps. These end caps/sockets serve as "dummies" to hold the LED tube in place.)
Slide the sockets/end caps into the designated holes/cutouts.
Place the cover over the end caps and around the fixture, and press it firmly into place. Then, turn the plastic clips into the holes still visible on the underside.
Insert the LED tubes into the fixture, placing the end with the specification sticker of the LED tube into the socket/fitting of the LED fixture where you have connected the 220-240V.
Turn the power back on and enjoy the light output of LED lighting.

For more information regarding the installation and operation of LED fixtures and LED tubes, please refer to our article. “How do I connect LED tube lighting?”

Looking for multiple types/lengths of fluorescent fixtures? Under our category 'Fluorescent fixture' you will find all our fluorescent fixtures.

Questions & Answers loading...