How to connect a 12 Volt LED Strip?

LED Strips 12V aansluiten

Connecting LED strips can be challenging, especially when you want to connect a 12-volt LED strip to the mains power (220V). In this blog, we explain what supplies you need to connect a 12-volt LED strip and how to install it. 12-volt LED strips operate on low voltage. 12 volts is a relatively low voltage and is commonly used in electronic devices and systems, such as lighting, fans, caravans, and other household appliances. If you want to install 12-volt lighting in your home, you will need a transformer. This converts the voltage from 220 volts to 12 volts. 12 volts offers several advantages:

• Safer to install
• Can be cut in more places. 12-volt LED strips can often be cut every 5/10 centimeters, giving you great flexibility. In contrast, a 220V LED strip can usually only be cut per meter.
• Low voltage.This makes the strips also suitable for installation in damp areas such as bathrooms
• Color Selection. 12 Volt LED Strips are available in various colors and wattages. Furthermore, the colors and brightness can be adjusted using a remote control.

Requirements for 12V LED Strip

To connect a 12-volt LED strip, you will need the following supplies:

1. A 12-volt adapter: This is required to power the LED strip. Make sure the adapter has sufficient capacity to power the LED strip. This depends on the length and type of LED strip you are using. An adapter goes by several names and is often also referred to as a transformer, driver, or power supply. If you want to install an LED strip in the kitchen, you will be connecting it to the mains electricity (220V).In this case, you need an adapter that converts the current from 220V to 12V. We have a wide range of LED Drivers for LED Strips.
2. LED strip: The LED strip itself is of course also required. Make sure you have the correct length and color for your project.
3. Connectors: Depending on the type of LED strip you are using, you may also need a 12V LED Strip connector to properly connect the LED strip.
4. Scissors or wire cutters: You will need scissors or wire cutters to cut the LED strip to the desired length.
5. Optional: dimmer or remote control. This depends on how you want to control the LED Strip. Another option is to install the LED Strip in a profile, which ensures a sleek finish.

LED Drivers	LED strip connectors	Dimmers	Remote controls	Profiles

Connecting 12 Volt LED Strips

Connecting 12 Volt LED strips is easy by following these steps:

1. Gather the required materials: a 12-volt adapter, LED strips, a soldering iron and solder, wire strippers, and electrical tape.
2. Cut the LED strip to the desired length and connect the wires to the power supply/transformer. If you need to install a dimmer or receiver (for a remote control) in between, the wires must first be connected to that device. Ensure that the wires are long enough to reach the power source and that the correct wires of the LED strip are connected (usually a positive and a negative wire).
3. Next, plug the adapter/power supply into the mains electricity. Some power supplies feature a Europlug, which can be plugged directly into the wall outlet. Other power supplies must be connected directly to the mains power wires. Ensure that the polarity matches (the positive wire of the LED strip must be connected to the positive terminal of the power supply and vice versa).
4. Test the connections to ensure the LEDs are working properly and that there are no short circuits.
5. Optional: check if the dimmer and remote control work in order to operate the LED Strip

Wiring diagram single-color 12 Volt LED Strip

Below you can find the wiring diagram for a single-color 12 Volt LED Strip. The dimmer is optional for dimming the LED Strip.